This site uses CSS formatting for best appearance in modern browsers. Unfortunately, this does not include Netscape 4.X. While all content is visible in Netscape 4.X, the page would really look much nicer in a CSS-compliant browser.

VTPH-1 Vacuum Tube Phono Preamplifier

VTPH-1 Front Panel
front panel
VTPH-1 Back Panel
rear panel

The VTPH-1 is available in two models:

Design Considerations

Tube complement 4 x 12AX7, 1 x 12AT7
Frequency response RIAA 1 Hz to beyond 100 kHz, 20 Hz to 20 kHz ±0.1 dB
Gain VTPH-1MM 44 dB nominal at 1kHz, channels matched to within 0.05 dB
VTPH-1MC Plus 66 dB nominal at 1kHz, channels matched to within 0.05 dB
Signal-to-Noise Ratio VTPH-MC Plus 80 dB, A weighted, inputs shorted, AC polarity set
Output impedance 500 ohms nominal
Input impedance VTPH-1MM 47,000 ohms, 100 pF
VTPH-1MC Plus 47,000 ohms, 100 pF, plus optional internal load resistors at the input terminals
Absolute polarity VTPH-1MM non-inverting
VTPH-1MC Plus non-inverting
Power supply 78,000 µF of energy storage
4 levels of high voltage regulation
Regulated soft start DC filament supply
Regulated tube bias supply
Input capacity VTPH-1MM up to 300 mV at 1 kHz, 1 volt at 10 kHz nominal (output unloaded)
VTPH-1MC Plus up to 30 mv at 1 khz, .1 volt at 10 kHz nominal (output unloaded)
Overall dimensions 19" wide x 3.5" high x 10" deep
Warranty 5 years, parts and labor
Tubes: 90 days

Copyright © 1996 - 2017 Herron Audio. All rights reserved.
Herron Audio, div. of Herron Engineering, Inc.
12685 Dorsett Road #138, Maryland Heights, MO 63043 U.S.A.
phone: 314-434-5416