M2 Monaural Power Amplifier

M2 with silver faceplate

The M2 Monaural Power Amplifiers are discontinued

titanium gray face plate - click on image for larger view

silver face plate also available

all face plates are 1/2 inch thick brushed anodized aluminum

  VTSP-360 Front Panel

 Silver             Gray

M2 back

M2 back

Immediately You Know!

LIVE, in-your-room clarity

The M2 is our latest implementation of state of the art fully analog power technology and highly refined music reproduction.

The M2 has a new FET input stage and an all new circuit board with additional circuitry which is not available in our previous versions or updates.

The Amplifier
The M2 is a full complementary symmetry bipolar implementation and contains no coupling capacitors in the forward direction. It employs the latest technology in wide band output devices with enhanced low level linearity. Proper stage-to-stage impedance matching insures extraordinarily low distortion and a unique successive stage to output confluence provides a seamless combination of micro/nano-resolution from forward stages and robust controlled power and authority from successive stages. This unified current summation drive stage network eliminates the crossover notch problems common in many solid state amplifier designs. High idle current or class A bias output stage operation is not necessary! The M2 runs cool under most listening conditions and provides a live presentation with none of the hardness normally associated with solid state amplifiers. The output network of this amplifier is resonance free and remains stable even with a 1 micro-Farad capacitor connected across the output terminals. The M2 engenders the fine resolution and liquidity normally associated with tube amplification plus the power and bass control of solid state. Individual voices remain distinct and clear amidst the crescendo full orchestra and chorus. The sound of the M2 is pure and true to the source. It has the clarity, focus in time, and natural sound inherent in all Herron Audio products.

DC Response
The M2 incorporates automatic low level d.c. offset cancellation plus high level d.c. shutdown speaker protection circuits. The effects of continuous low level d.c. at the input of the M2 will be nulled out over time and higher levels of d.c. at the input will engage the shutdown protection.

The M2 has an oversized toroidal transformer capable of supplying enough current to power two amplifiers with the ratings of the M2. This transformer is designed to have low losses and will run cool under all operating conditions.

Configuration Single-channel (monaural)
Frequency response 20 Hz to 20 kHz ±0.1 dB
Output Power 150 watts @ 8 ohms, 275 watts @ 4 ohms (measurements at 1 khz)
Gain 24 db
Input impedance 220k Ohms
Absolute polarity Non-inverting
Power Requirements 100, 120, 230, 240 VAC. 50/60 Hz. Standard IEC power connector. Toroidal transformer taps internally selected for appropriate voltage
Dimensions 17.6" wide x 4" high (including rubber feet) x 11" deep
Warranty 3 years, parts and labor
U.S. Retail Price $7,850 U.S.D. PER PAIR

Copyright © 1996 - 2022 Herron Audio. All rights reserved.
Herron Audio, div. of Herron Engineering, Inc.
12685 Dorsett Road #138, Maryland Heights, MO 63043 U.S.A.
phone: 314-434-5416