M150 Monaural Power Amplifier
The M150 is a full complementary symmetry bipolar implementation and contains no coupling capacitors in the forward direction. It employs the latest technology in wide band output devices with enhanced low level linearity. Proper stage-to-stage impedance matching insures extraordinarily low distortion and a unique successive stage to output confluence provides a seamless combination of micro/nano-resolution from forward stages and robust controlled power and authority from successive stages. This unified current summation drive stage network eliminates the crossover notch problems common in many solid state amplifier designs. High idle current or class A bias output stage operation is not necessary! The M150 runs cool under most listening conditions and provides a live presentation with none of the hardness normally associated with solid state amplifiers. The output network of this amplifier is resonance free and remains stable even with a 1 micro-Farad capacitor connected across the output terminals. The M150 engenders the fine resolution and liquidity normally associated with tube amplification plus the power and bass control of solid state. Individual voices remain distinct and clear amidst the crescendo full orchestra and chorus. The sound of the M150 is pure and true to the source. It has the clarity, focus in time, and natural sound inherent in all Herron Audio products.
The M150 incorporates automatic low level d.c. offset cancellation plus high level d.c. shutdown speaker protection circuits. The effects of continuous low level d.c. at the input of the M150 will be nulled out over time and higher levels of d.c. at the input will engage the shutdown protection.
The M150 has an oversized toroidal transformer capable of supplying enough current to power two amplifiers with the ratings of the M150. This transformer is designed to have low losses and will run cool under all operating conditions.
|Frequency response||20 Hz to 20 kHz ±0.1 dB|
|Output Power||150 watts @ 8 ohms, 275 watts @ 4 ohms (measurements at 1 khz)|
|Input impedance||220k Ohms|
|Speaker fuse||AGC 6 amp supplied, value to be selected by user for proper speaker protection.|
|Power Requirements||100, 120, 230, 240 VAC. 50/60 Hz. Standard IEC power connector. Toroidal transformer taps internally selected for appropriate voltage|
|Main(s) Fuse||120 VAC - MDL5, 100 VAC - MDL4, 230 VAC - MDL3, 240VAC - MDL-3|
|Dimensions||19" wide x 4" high x 10.5" deep|
|Warranty||5 years, parts and labor|
|Suggested Retail||$5,895.00 per pair|
Copyright © 1996 - 2019 Herron Audio. All rights reserved.
Herron Audio, div. of Herron Engineering, Inc.
12685 Dorsett Road #138, Maryland Heights, MO 63043 U.S.A.